Mitsubishi Eclipse ABS Wheel Speed Sensor in US

Your Mitsubishi Eclipse ABS wheel speed sensor is the component that makes anti-lock braking possible on your Eclipse. It monitors the rotational speed of each wheel in real time and sends that data to the Mitsubishi Eclipse ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Eclipse, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Mitsubishi Eclipse wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Mitsubishi Eclipse

The ABS wheel speed sensor on the Mitsubishi Eclipse is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Eclipse. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Eclipse ABS module interprets as wheel speed. On most modern Mitsubishi Eclipse vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Eclipse systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Mitsubishi Eclipse

• ABS warning light on your Mitsubishi Eclipse dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Eclipse ABS light
• ABS activating on your Mitsubishi Eclipse during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Eclipse, wheels lock under hard braking on wet or icy roads
• Speedometer on your Mitsubishi Eclipse reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Mitsubishi Eclipse ABS control module

Passive vs. Active ABS Sensors for the Mitsubishi Eclipse

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Mitsubishi Eclipse. Passive sensors use an analog signal and are found on older Eclipse vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Mitsubishi Eclipse vehicles manufactured after the mid-2000s and are required for full compatibility with modern Eclipse traction and stability control systems.

Why GeoBrakes for the Mitsubishi Eclipse ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Mitsubishi Eclipse wheel speed sensors. A sensor that generates the correct frequency for your Eclipse ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Mitsubishi Eclipse. Every sensor in the GeoBrakes catalogue is matched to the Mitsubishi Eclipse through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Eclipse.

Frequently Asked Questions - Mitsubishi Eclipse ABS Wheel Speed Sensor

Can I drive my Mitsubishi Eclipse with a faulty ABS wheel speed sensor?

You can drive the Mitsubishi Eclipse with a failed ABS sensor, but the anti-lock braking system on your Eclipse will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Mitsubishi Eclipse. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Mitsubishi Eclipse?

Use the GeoBrakes vehicle selector and enter the Mitsubishi Eclipse year, make, and model. The system displays only the sensors confirmed to fit the Mitsubishi Eclipse, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Eclipse to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Mitsubishi Eclipse at the same time?

No. ABS wheel speed sensors on the Mitsubishi Eclipse are independent components and only the failed unit needs to be replaced. However, if your Eclipse has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Mitsubishi Eclipse sensors for corrosion while the wheel is removed.