Mitsubishi Asx ABS Wheel Speed Sensor in US

Your Mitsubishi Asx ABS wheel speed sensor is the component that makes anti-lock braking possible on your Asx. It monitors the rotational speed of each wheel in real time and sends that data to the Mitsubishi Asx ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Asx, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Mitsubishi Asx wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Mitsubishi Asx

The ABS wheel speed sensor on the Mitsubishi Asx is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Asx. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Asx ABS module interprets as wheel speed. On most modern Mitsubishi Asx vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Asx systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Mitsubishi Asx

• ABS warning light on your Mitsubishi Asx dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Asx ABS light
• ABS activating on your Mitsubishi Asx during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Asx, wheels lock under hard braking on wet or icy roads
• Speedometer on your Mitsubishi Asx reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Mitsubishi Asx ABS control module

Passive vs. Active ABS Sensors for the Mitsubishi Asx

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Mitsubishi Asx. Passive sensors use an analog signal and are found on older Asx vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Mitsubishi Asx vehicles manufactured after the mid-2000s and are required for full compatibility with modern Asx traction and stability control systems.

Why GeoBrakes for the Mitsubishi Asx ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Mitsubishi Asx wheel speed sensors. A sensor that generates the correct frequency for your Asx ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Mitsubishi Asx. Every sensor in the GeoBrakes catalogue is matched to the Mitsubishi Asx through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Asx.

Frequently Asked Questions - Mitsubishi Asx ABS Wheel Speed Sensor

Can I drive my Mitsubishi Asx with a faulty ABS wheel speed sensor?

You can drive the Mitsubishi Asx with a failed ABS sensor, but the anti-lock braking system on your Asx will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Mitsubishi Asx. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Mitsubishi Asx?

Use the GeoBrakes vehicle selector and enter the Mitsubishi Asx year, make, and model. The system displays only the sensors confirmed to fit the Mitsubishi Asx, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Asx to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Mitsubishi Asx at the same time?

No. ABS wheel speed sensors on the Mitsubishi Asx are independent components and only the failed unit needs to be replaced. However, if your Asx has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Mitsubishi Asx sensors for corrosion while the wheel is removed.