Standard/OEIn stock
$219.88
10 items in stock
Quality For FREE Shipping
KBC-100445• Rear• Disc Brake Caliper Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake caliper kits confirmed to fit the Mercury Sable, pairing a replacement caliper at the correct left or right hand specification for the Sable with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Mercury Sable is restored in a single service. Every kit is confirmed for the Mercury Sable exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OE$219.88
10 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Mercury Sable seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Sable keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Mercury Sable is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Mercury Sable together.
The kit for your Mercury Sable includes the disc brake caliper at the correct left or right hand specification for the Sable, either new OEM-spec or quality remanufactured to the Mercury Sable piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Sable caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Mercury Sable, brake lubricant for correct pin and shim installation on your Sable, and copper washers or banjo bolt seals for the brake hose connection where required by the Mercury Sable application.
A caliper kit is the right call for the Mercury Sable in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Sable are already compromised. During a high-mileage Sable overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Mercury Sable are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Sable brake pad renders the friction material permanently ineffective on your Mercury Sable.
New OEM-specification calipers for the Mercury Sable are manufactured from fresh materials with no prior service history, the strongest choice for Sable vehicles in high-corrosion environments. Remanufactured calipers use original Mercury Sable housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Sable replacement applications.
Calipers for the Mercury Sable are the most position-specific brake component in the catalogue. Left and right calipers for the Sable are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Mercury Sable exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Mercury Sable at the same time?
It is strongly recommended. If one caliper on the Mercury Sable has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Sable. Replacing both restores balanced, even braking and eliminates the risk of the second Sable caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Mercury Sable after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Mercury Sable to install the new caliper allows air to enter. After installation, the brake circuit on the Sable must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Mercury Sable.
What is the difference between a new and remanufactured caliper in the Mercury Sable kit?
A new caliper for the Mercury Sable has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Sable housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Mercury Sable applications.