Mercedes Benz V250 Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Mercedes Benz V250 does one critical thing that a pad change alone cannot: it ensures the brake warning light on your V250 dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz V250, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your V250. On Mercedes Benz V250 vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the V250.

What Is Included in the Mercedes Benz V250 Brake Pad Wear Sensor Kit

The kit for your Mercedes Benz V250 includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the V250 monitoring circuit, the wiring connector mating with the Mercedes Benz V250 brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the V250 brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz V250 with sensor pre-assembled at factory-correct position on the V250 pad.

Why the Sensor Probe Specification Matters on the Mercedes Benz V250

A brake pad wear sensor on the Mercedes Benz V250 is a calibrated component manufactured to trigger the V250 brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz V250, sending drivers for an unnecessary brake service with significant V250 pad life remaining. Too short and it triggers late or not at all on the V250, leaving the driver with no advance warning as the Mercedes Benz V250 pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Mercedes Benz V250 Is Due

• Brake pad warning light illuminated on your Mercedes Benz V250 dashboard
• V250 warning light that stays on after a recent pad change, indicating sensor was not replaced on the Mercedes Benz V250
• Brake pads on your Mercedes Benz V250 at or approaching minimum thickness on inspection
• Worn sensor probe visible on the V250 brake pad during a brake service inspection

Why GeoBrakes for the Mercedes Benz V250 Wear Sensor Kit

Wear sensor compatibility for the Mercedes Benz V250 is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the V250 brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz V250 either triggers warnings at the wrong pad thickness or fails to connect to the existing V250 harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz V250 exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Mercedes Benz V250 Brake Pad Wear Sensor Kits

How do I know if my Mercedes Benz V250 has electronic brake pad wear sensors?

Check your Mercedes Benz V250 owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz V250 application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Mercedes Benz V250?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz V250. If replacing V250 pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz V250.

Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz V250?

On most Mercedes Benz V250 vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz V250 European platforms, a diagnostic scan tool reset may be required. Check your V250 service documentation if the light does not clear after installation.