Mercedes Benz Slk55 Amg ABS Wheel Speed Sensor in US

Your Mercedes Benz Slk55 Amg ABS wheel speed sensor is the component that makes anti-lock braking possible on your Slk55 Amg. It monitors the rotational speed of each wheel in real time and sends that data to the Mercedes Benz Slk55 Amg ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Slk55 Amg, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Mercedes Benz Slk55 Amg wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Mercedes Benz Slk55 Amg

The ABS wheel speed sensor on the Mercedes Benz Slk55 Amg is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Slk55 Amg. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Slk55 Amg ABS module interprets as wheel speed. On most modern Mercedes Benz Slk55 Amg vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Slk55 Amg systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Mercedes Benz Slk55 Amg

• ABS warning light on your Mercedes Benz Slk55 Amg dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Slk55 Amg ABS light
• ABS activating on your Mercedes Benz Slk55 Amg during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Slk55 Amg, wheels lock under hard braking on wet or icy roads
• Speedometer on your Mercedes Benz Slk55 Amg reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Mercedes Benz Slk55 Amg ABS control module

Passive vs. Active ABS Sensors for the Mercedes Benz Slk55 Amg

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Mercedes Benz Slk55 Amg. Passive sensors use an analog signal and are found on older Slk55 Amg vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Mercedes Benz Slk55 Amg vehicles manufactured after the mid-2000s and are required for full compatibility with modern Slk55 Amg traction and stability control systems.

Why GeoBrakes for the Mercedes Benz Slk55 Amg ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Mercedes Benz Slk55 Amg wheel speed sensors. A sensor that generates the correct frequency for your Slk55 Amg ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Mercedes Benz Slk55 Amg. Every sensor in the GeoBrakes catalogue is matched to the Mercedes Benz Slk55 Amg through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Slk55 Amg.

Frequently Asked Questions - Mercedes Benz Slk55 Amg ABS Wheel Speed Sensor

Can I drive my Mercedes Benz Slk55 Amg with a faulty ABS wheel speed sensor?

You can drive the Mercedes Benz Slk55 Amg with a failed ABS sensor, but the anti-lock braking system on your Slk55 Amg will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Mercedes Benz Slk55 Amg. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Mercedes Benz Slk55 Amg?

Use the GeoBrakes vehicle selector and enter the Mercedes Benz Slk55 Amg year, make, and model. The system displays only the sensors confirmed to fit the Mercedes Benz Slk55 Amg, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Slk55 Amg to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Mercedes Benz Slk55 Amg at the same time?

No. ABS wheel speed sensors on the Mercedes Benz Slk55 Amg are independent components and only the failed unit needs to be replaced. However, if your Slk55 Amg has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Mercedes Benz Slk55 Amg sensors for corrosion while the wheel is removed.