Standard/OEIn stock
$18.55
10 items in stock
Quality For FREE Shipping
KSE-100065• Front• Disc Brake Pad Wear Sensor Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake pad wear sensor kits confirmed to fit the Mercedes Benz Slk200, combining the wear sensor probe manufactured to the exact OEM probe length and contact resistance for the Slk200 with connector hardware, retaining clips, and in pad-inclusive configurations the brake pads themselves, so the complete brake monitoring system on your Mercedes Benz Slk200 is restored correctly in a single service.
Standard/OE$18.55
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A brake pad wear sensor kit for the Mercedes Benz Slk200 does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Slk200 dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz Slk200, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Slk200. On Mercedes Benz Slk200 vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Slk200.
The kit for your Mercedes Benz Slk200 includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Slk200 monitoring circuit, the wiring connector mating with the Mercedes Benz Slk200 brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Slk200 brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz Slk200 with sensor pre-assembled at factory-correct position on the Slk200 pad.
A brake pad wear sensor on the Mercedes Benz Slk200 is a calibrated component manufactured to trigger the Slk200 brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz Slk200, sending drivers for an unnecessary brake service with significant Slk200 pad life remaining. Too short and it triggers late or not at all on the Slk200, leaving the driver with no advance warning as the Mercedes Benz Slk200 pads approach the metal backing plate.
Wear sensor compatibility for the Mercedes Benz Slk200 is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Slk200 brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz Slk200 either triggers warnings at the wrong pad thickness or fails to connect to the existing Slk200 harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz Slk200 exact year and model, with front and rear positions listed separately.
How do I know if my Mercedes Benz Slk200 has electronic brake pad wear sensors?
Check your Mercedes Benz Slk200 owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz Slk200 application requires an electronic sensor kit.
Can I buy the wear sensor separately from the brake pads for my Mercedes Benz Slk200?
Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz Slk200. If replacing Slk200 pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz Slk200.
Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz Slk200?
On most Mercedes Benz Slk200 vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz Slk200 European platforms, a diagnostic scan tool reset may be required. Check your Slk200 service documentation if the light does not clear after installation.