Standard/OEIn stock
$18.55
10 items in stock
Quality For FREE Shipping
KSE-100296• Rear• Disc Brake Pad Wear Sensor Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake pad wear sensor kits confirmed to fit the Mercedes Benz Sl450, combining the wear sensor probe manufactured to the exact OEM probe length and contact resistance for the Sl450 with connector hardware, retaining clips, and in pad-inclusive configurations the brake pads themselves, so the complete brake monitoring system on your Mercedes Benz Sl450 is restored correctly in a single service.
Standard/OE$18.55
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A brake pad wear sensor kit for the Mercedes Benz Sl450 does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Sl450 dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz Sl450, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Sl450. On Mercedes Benz Sl450 vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Sl450.
The kit for your Mercedes Benz Sl450 includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Sl450 monitoring circuit, the wiring connector mating with the Mercedes Benz Sl450 brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Sl450 brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz Sl450 with sensor pre-assembled at factory-correct position on the Sl450 pad.
A brake pad wear sensor on the Mercedes Benz Sl450 is a calibrated component manufactured to trigger the Sl450 brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz Sl450, sending drivers for an unnecessary brake service with significant Sl450 pad life remaining. Too short and it triggers late or not at all on the Sl450, leaving the driver with no advance warning as the Mercedes Benz Sl450 pads approach the metal backing plate.
Wear sensor compatibility for the Mercedes Benz Sl450 is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Sl450 brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz Sl450 either triggers warnings at the wrong pad thickness or fails to connect to the existing Sl450 harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz Sl450 exact year and model, with front and rear positions listed separately.
How do I know if my Mercedes Benz Sl450 has electronic brake pad wear sensors?
Check your Mercedes Benz Sl450 owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz Sl450 application requires an electronic sensor kit.
Can I buy the wear sensor separately from the brake pads for my Mercedes Benz Sl450?
Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz Sl450. If replacing Sl450 pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz Sl450.
Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz Sl450?
On most Mercedes Benz Sl450 vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz Sl450 European platforms, a diagnostic scan tool reset may be required. Check your Sl450 service documentation if the light does not clear after installation.