Mercedes Benz R350 Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Mercedes Benz R350 does one critical thing that a pad change alone cannot: it ensures the brake warning light on your R350 dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz R350, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your R350. On Mercedes Benz R350 vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the R350.

What Is Included in the Mercedes Benz R350 Brake Pad Wear Sensor Kit

The kit for your Mercedes Benz R350 includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the R350 monitoring circuit, the wiring connector mating with the Mercedes Benz R350 brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the R350 brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz R350 with sensor pre-assembled at factory-correct position on the R350 pad.

Why the Sensor Probe Specification Matters on the Mercedes Benz R350

A brake pad wear sensor on the Mercedes Benz R350 is a calibrated component manufactured to trigger the R350 brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz R350, sending drivers for an unnecessary brake service with significant R350 pad life remaining. Too short and it triggers late or not at all on the R350, leaving the driver with no advance warning as the Mercedes Benz R350 pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Mercedes Benz R350 Is Due

• Brake pad warning light illuminated on your Mercedes Benz R350 dashboard
• R350 warning light that stays on after a recent pad change, indicating sensor was not replaced on the Mercedes Benz R350
• Brake pads on your Mercedes Benz R350 at or approaching minimum thickness on inspection
• Worn sensor probe visible on the R350 brake pad during a brake service inspection

Why GeoBrakes for the Mercedes Benz R350 Wear Sensor Kit

Wear sensor compatibility for the Mercedes Benz R350 is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the R350 brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz R350 either triggers warnings at the wrong pad thickness or fails to connect to the existing R350 harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz R350 exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Mercedes Benz R350 Brake Pad Wear Sensor Kits

How do I know if my Mercedes Benz R350 has electronic brake pad wear sensors?

Check your Mercedes Benz R350 owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz R350 application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Mercedes Benz R350?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz R350. If replacing R350 pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz R350.

Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz R350?

On most Mercedes Benz R350 vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz R350 European platforms, a diagnostic scan tool reset may be required. Check your R350 service documentation if the light does not clear after installation.