Mercedes Benz Metris Disc Brake Caliper in US

The disc brake caliper on the Mercedes Benz Metris is the hydraulic clamp at the centre of your Metris disc brake system. Every time you press the brake pedal on your Mercedes Benz Metris, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Metris interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Mercedes Benz Metris

• Mercedes Benz Metris pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Metris feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Mercedes Benz Metris axle wears significantly faster than its partner
• Brake drag on the Mercedes Benz Metris, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Metris caliper body or around the piston boot
• Grinding or scraping from one Mercedes Benz Metris wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Mercedes Benz Metris

New OEM-Specification Calipers for the Mercedes Benz Metris

New OEM-specification calipers for the Mercedes Benz Metris are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Metris factory part. They offer the longest service life on your Mercedes Benz Metris and are the strongest choice for higher-mileage Metris vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Mercedes Benz Metris

Remanufactured calipers for the Mercedes Benz Metris are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Mercedes Benz Metris replacement applications and offer excellent value.

Why GeoBrakes for the Mercedes Benz Metris Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Mercedes Benz Metris to give you the right option for your Metris and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Mercedes Benz Metris, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Mercedes Benz Metris year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Mercedes Benz Metris Disc Brake Caliper

Should I replace brake calipers on my Mercedes Benz Metris in pairs?

It is generally recommended to replace calipers as an axle pair on the Mercedes Benz Metris, both left and right on the same axle, to maintain balanced braking. If one Metris caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Mercedes Benz Metris in US?

Mercedes Benz Metris calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Metris caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Mercedes Benz Metris well before that figure.

Can a sticking caliper on my Mercedes Benz Metris damage my brake pads and rotors?

Yes. A Metris caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Mercedes Benz Metris. This rapidly wears both the pad and rotor surface on your Metris and generates enough heat buildup to damage adjacent components over time.