Standard/OE$18.55
10 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake pad wear sensor kits confirmed to fit the Mercedes Benz Gle550e, combining the wear sensor probe manufactured to the exact OEM probe length and contact resistance for the Gle550e with connector hardware, retaining clips, and in pad-inclusive configurations the brake pads themselves, so the complete brake monitoring system on your Mercedes Benz Gle550e is restored correctly in a single service.
Standard/OE$18.55
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A brake pad wear sensor kit for the Mercedes Benz Gle550e does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Gle550e dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz Gle550e, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Gle550e. On Mercedes Benz Gle550e vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Gle550e.
The kit for your Mercedes Benz Gle550e includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Gle550e monitoring circuit, the wiring connector mating with the Mercedes Benz Gle550e brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Gle550e brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz Gle550e with sensor pre-assembled at factory-correct position on the Gle550e pad.
A brake pad wear sensor on the Mercedes Benz Gle550e is a calibrated component manufactured to trigger the Gle550e brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz Gle550e, sending drivers for an unnecessary brake service with significant Gle550e pad life remaining. Too short and it triggers late or not at all on the Gle550e, leaving the driver with no advance warning as the Mercedes Benz Gle550e pads approach the metal backing plate.
Wear sensor compatibility for the Mercedes Benz Gle550e is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Gle550e brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz Gle550e either triggers warnings at the wrong pad thickness or fails to connect to the existing Gle550e harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz Gle550e exact year and model, with front and rear positions listed separately.
How do I know if my Mercedes Benz Gle550e has electronic brake pad wear sensors?
Check your Mercedes Benz Gle550e owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz Gle550e application requires an electronic sensor kit.
Can I buy the wear sensor separately from the brake pads for my Mercedes Benz Gle550e?
Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz Gle550e. If replacing Gle550e pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz Gle550e.
Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz Gle550e?
On most Mercedes Benz Gle550e vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz Gle550e European platforms, a diagnostic scan tool reset may be required. Check your Gle550e service documentation if the light does not clear after installation.