Mercedes Benz Cls63 Amg S Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Mercedes Benz Cls63 Amg S does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Cls63 Amg S dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz Cls63 Amg S, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Cls63 Amg S. On Mercedes Benz Cls63 Amg S vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Cls63 Amg S.

What Is Included in the Mercedes Benz Cls63 Amg S Brake Pad Wear Sensor Kit

The kit for your Mercedes Benz Cls63 Amg S includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Cls63 Amg S monitoring circuit, the wiring connector mating with the Mercedes Benz Cls63 Amg S brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Cls63 Amg S brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz Cls63 Amg S with sensor pre-assembled at factory-correct position on the Cls63 Amg S pad.

Why the Sensor Probe Specification Matters on the Mercedes Benz Cls63 Amg S

A brake pad wear sensor on the Mercedes Benz Cls63 Amg S is a calibrated component manufactured to trigger the Cls63 Amg S brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz Cls63 Amg S, sending drivers for an unnecessary brake service with significant Cls63 Amg S pad life remaining. Too short and it triggers late or not at all on the Cls63 Amg S, leaving the driver with no advance warning as the Mercedes Benz Cls63 Amg S pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Mercedes Benz Cls63 Amg S Is Due

• Brake pad warning light illuminated on your Mercedes Benz Cls63 Amg S dashboard
• Cls63 Amg S warning light that stays on after a recent pad change, indicating sensor was not replaced on the Mercedes Benz Cls63 Amg S
• Brake pads on your Mercedes Benz Cls63 Amg S at or approaching minimum thickness on inspection
• Worn sensor probe visible on the Cls63 Amg S brake pad during a brake service inspection

Why GeoBrakes for the Mercedes Benz Cls63 Amg S Wear Sensor Kit

Wear sensor compatibility for the Mercedes Benz Cls63 Amg S is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Cls63 Amg S brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz Cls63 Amg S either triggers warnings at the wrong pad thickness or fails to connect to the existing Cls63 Amg S harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz Cls63 Amg S exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Mercedes Benz Cls63 Amg S Brake Pad Wear Sensor Kits

How do I know if my Mercedes Benz Cls63 Amg S has electronic brake pad wear sensors?

Check your Mercedes Benz Cls63 Amg S owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz Cls63 Amg S application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Mercedes Benz Cls63 Amg S?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz Cls63 Amg S. If replacing Cls63 Amg S pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz Cls63 Amg S.

Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz Cls63 Amg S?

On most Mercedes Benz Cls63 Amg S vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz Cls63 Amg S European platforms, a diagnostic scan tool reset may be required. Check your Cls63 Amg S service documentation if the light does not clear after installation.