Mercedes Benz Cl65 Amg ABS Wheel Speed Sensor in US

Your Mercedes Benz Cl65 Amg ABS wheel speed sensor is the component that makes anti-lock braking possible on your Cl65 Amg. It monitors the rotational speed of each wheel in real time and sends that data to the Mercedes Benz Cl65 Amg ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Cl65 Amg, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Mercedes Benz Cl65 Amg wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Mercedes Benz Cl65 Amg

The ABS wheel speed sensor on the Mercedes Benz Cl65 Amg is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Cl65 Amg. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Cl65 Amg ABS module interprets as wheel speed. On most modern Mercedes Benz Cl65 Amg vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Cl65 Amg systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Mercedes Benz Cl65 Amg

• ABS warning light on your Mercedes Benz Cl65 Amg dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Cl65 Amg ABS light
• ABS activating on your Mercedes Benz Cl65 Amg during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Cl65 Amg, wheels lock under hard braking on wet or icy roads
• Speedometer on your Mercedes Benz Cl65 Amg reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Mercedes Benz Cl65 Amg ABS control module

Passive vs. Active ABS Sensors for the Mercedes Benz Cl65 Amg

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Mercedes Benz Cl65 Amg. Passive sensors use an analog signal and are found on older Cl65 Amg vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Mercedes Benz Cl65 Amg vehicles manufactured after the mid-2000s and are required for full compatibility with modern Cl65 Amg traction and stability control systems.

Why GeoBrakes for the Mercedes Benz Cl65 Amg ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Mercedes Benz Cl65 Amg wheel speed sensors. A sensor that generates the correct frequency for your Cl65 Amg ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Mercedes Benz Cl65 Amg. Every sensor in the GeoBrakes catalogue is matched to the Mercedes Benz Cl65 Amg through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Cl65 Amg.

Frequently Asked Questions - Mercedes Benz Cl65 Amg ABS Wheel Speed Sensor

Can I drive my Mercedes Benz Cl65 Amg with a faulty ABS wheel speed sensor?

You can drive the Mercedes Benz Cl65 Amg with a failed ABS sensor, but the anti-lock braking system on your Cl65 Amg will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Mercedes Benz Cl65 Amg. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Mercedes Benz Cl65 Amg?

Use the GeoBrakes vehicle selector and enter the Mercedes Benz Cl65 Amg year, make, and model. The system displays only the sensors confirmed to fit the Mercedes Benz Cl65 Amg, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Cl65 Amg to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Mercedes Benz Cl65 Amg at the same time?

No. ABS wheel speed sensors on the Mercedes Benz Cl65 Amg are independent components and only the failed unit needs to be replaced. However, if your Cl65 Amg has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Mercedes Benz Cl65 Amg sensors for corrosion while the wheel is removed.