Standard/OEIn stock
$8.19
10 items in stock
Quality For FREE Shipping
SEN-2BWS0007• Front• Disc Brake Pad Wear Sensor
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade disc brake pad wear sensors confirmed to fit the Mercedes Benz C400, the single-use probe components that trigger your C400 dashboard warning light the moment your brake pads approach minimum thickness. Every sensor is direct-fit for the Mercedes Benz C400
Standard/OE$8.19
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A disc brake pad wear sensor on the Mercedes Benz C400 is your vehicle's advance warning system for brake pad replacement. It eliminates the need to rely on audible squealing from your C400 to know your pads are getting thin, instead triggering a dashboard warning light at a preset minimum thickness on the Mercedes Benz C400, giving you time to plan the replacement before the pads wear through to the metal backing plate. Replacing a triggered sensor with every C400 pad change is the only way to keep that early-warning system working for the next service interval.
The wear sensor on the Mercedes Benz C400 is a small probe embedded in or clipped to the brake pad. When the C400 pad wears down to the replacement threshold, the probe contacts the rotor surface. This contact creates a circuit change that signals the Mercedes Benz C400 ABS or brake control module, illuminating the brake warning light. Once the probe on the Mercedes Benz C400 has contacted the rotor, it is destroyed and cannot be reused. It is a single-use component by design on the C400.
Installing fresh brake pads on the Mercedes Benz C400 without fitting a new wear sensor defeats the entire purpose of having a brake monitoring system on your C400. A previously triggered sensor probe is worn through and has no remaining material to detect the next set of C400 pads wearing down. From day one of the new Mercedes Benz C400 brake pads, the warning system is non-functional without a new sensor.
Wear sensor compatibility for the Mercedes Benz C400 is more exacting than most brake parts. The probe length, contact resistance specification, and connector design must all match the C400 brake monitoring circuit precisely. A wrong sensor triggers Mercedes Benz C400 warnings at the wrong pad thickness, or not at all. Every sensor in the GeoBrakes catalogue is sourced to original equipment probe and connector specifications for the Mercedes Benz C400, with front and rear positions listed separately.
Do I need to replace the brake pad wear sensor every time I change pads on my Mercedes Benz C400?
Yes, on Mercedes Benz C400 vehicles equipped with electronic wear sensors. The sensor probe on your C400 is a single-use component. Once it has contacted the rotor and triggered the C400 warning light, the probe is consumed. Always replace the Mercedes Benz C400 sensor during every pad change.
Does my Mercedes Benz C400 have electronic brake pad wear sensors?
Many vehicles use a mechanical wear indicator instead of electronic sensors. Check your Mercedes Benz C400 owner's manual or use the GeoBrakes vehicle selector to confirm whether your C400 uses an electronic pad monitoring system.
Can a faulty wear sensor keep the brake warning light on my Mercedes Benz C400 on after new pads are installed?
Yes. If the Mercedes Benz C400 wear sensor from a previous brake service was not replaced, or if the probe has been damaged on your C400, the brake warning light will remain on even with new pads. Replacing the C400 sensor will clear the fault and restore normal operation.