Mercedes Benz 560sl Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Mercedes Benz 560sl does one critical thing that a pad change alone cannot: it ensures the brake warning light on your 560sl dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Mercedes Benz 560sl, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your 560sl. On Mercedes Benz 560sl vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the 560sl.

What Is Included in the Mercedes Benz 560sl Brake Pad Wear Sensor Kit

The kit for your Mercedes Benz 560sl includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the 560sl monitoring circuit, the wiring connector mating with the Mercedes Benz 560sl brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the 560sl brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Mercedes Benz 560sl with sensor pre-assembled at factory-correct position on the 560sl pad.

Why the Sensor Probe Specification Matters on the Mercedes Benz 560sl

A brake pad wear sensor on the Mercedes Benz 560sl is a calibrated component manufactured to trigger the 560sl brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Mercedes Benz 560sl, sending drivers for an unnecessary brake service with significant 560sl pad life remaining. Too short and it triggers late or not at all on the 560sl, leaving the driver with no advance warning as the Mercedes Benz 560sl pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Mercedes Benz 560sl Is Due

• Brake pad warning light illuminated on your Mercedes Benz 560sl dashboard
• 560sl warning light that stays on after a recent pad change, indicating sensor was not replaced on the Mercedes Benz 560sl
• Brake pads on your Mercedes Benz 560sl at or approaching minimum thickness on inspection
• Worn sensor probe visible on the 560sl brake pad during a brake service inspection

Why GeoBrakes for the Mercedes Benz 560sl Wear Sensor Kit

Wear sensor compatibility for the Mercedes Benz 560sl is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the 560sl brake monitoring circuit exactly. A wrong-spec sensor on your Mercedes Benz 560sl either triggers warnings at the wrong pad thickness or fails to connect to the existing 560sl harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Mercedes Benz 560sl exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Mercedes Benz 560sl Brake Pad Wear Sensor Kits

How do I know if my Mercedes Benz 560sl has electronic brake pad wear sensors?

Check your Mercedes Benz 560sl owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Mercedes Benz 560sl application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Mercedes Benz 560sl?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Mercedes Benz 560sl. If replacing 560sl pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Mercedes Benz 560sl.

Will the brake warning light turn off automatically after installing a new sensor on my Mercedes Benz 560sl?

On most Mercedes Benz 560sl vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Mercedes Benz 560sl European platforms, a diagnostic scan tool reset may be required. Check your 560sl service documentation if the light does not clear after installation.