Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade brake drums confirmed to fit the Mazda Mx 3, the cast-iron components that form the friction surface for the Mx 3 drum brake shoes. Available in standard and corrosion-coated configurations for your Mx 3, every drum is manufactured to the correct inner diameter, wall thickness, and surface finish for the Mazda Mx 3
Standard/OESelect your vehicle to see compatible products and accurate pricing
The brake drum on the Mazda Mx 3 is the rotating cast-iron bowl that the Mx 3 drum brake shoes press against to slow your vehicle. Mounted to the rear axle hub of your Mazda Mx 3, it spins with the wheel and provides the friction surface that the shoes contact under braking. Unlike brake rotors, which can be visually inspected from outside the wheel on many Mx 3 vehicles, Mazda Mx 3 brake drums fully enclose the shoe assembly, which means wear and damage often goes unnoticed until braking performance on the Mazda Mx 3 is noticeably affected.
Standard OEM-Grade Drums for the Mazda Mx 3
Standard OEM-grade cast-iron drums for the Mazda Mx 3 are manufactured to the original equipment diameter, wall thickness, and surface finish specification for your Mx 3. They are the direct replacement for the factory Mx 3 drum with no modification required.
Coated Brake Drums for the Mazda Mx 3
Coated Mazda Mx 3 brake drums feature a corrosion-resistant coating applied to the external drum surfaces of your Mx 3, the hat section, outer wall, and wheel mounting face. Surface rust is a common issue on Mazda Mx 3 drum brake vehicles in US, particularly during periods of non-use in winter when moisture and salt collect inside the Mx 3 wheel well. A coated drum on your Mazda Mx 3 resists surface rust that can transfer to the wheel mounting face, making future drum removal significantly easier at the next Mx 3 brake service.
Mazda Mx 3 brake drum replacement requires matching the correct inner diameter, wall thickness, bolt circle, hub bore, and drum offset for your Mx 3. Errors in any of these dimensions produce incorrect shoe-to-drum clearance, uneven wear, and braking problems on the Mazda Mx 3. Our vehicle selector eliminates those risks by confirming the correct drum for the Mazda Mx 3 exact year, make, model, and axle. Coated Mx 3 drum options are available for vehicles with heavy salt exposure.
How long do brake drums last on a Mazda Mx 3?
Mazda Mx 3 brake drums typically last 150,000 to 200,000 kilometres with periodic resurfacing, significantly longer than disc brake rotors on the Mx 3. Each resurfacing removes material from the Mx 3 drum and reduces wall thickness. Once the Mazda Mx 3 drum reaches its maximum allowable inner diameter, it must be replaced rather than turned again.
Should I replace brake drums on my Mazda Mx 3 in pairs?
Yes. Replace both Mazda Mx 3 drums on the same axle to maintain balanced braking. Drums of different inner diameters on the Mx 3 create uneven friction forces, causing the Mazda Mx 3 to pull to the fresher-drum side during braking.
Should I replace drums and shoes at the same time on my Mazda Mx 3?
Yes, it is strongly recommended for the Mazda Mx 3. New shoes on a scored or out-of-round Mx 3 drum wear unevenly from day one. New Mazda Mx 3 drums with old shoes that have worn to match the old drum surface will contact the new bore incorrectly. Replacing both together on the Mx 3 ensures proper break-in and maximum service life from both components.