Kia Soul ABS Wheel Speed Sensor in US

Your Kia Soul ABS wheel speed sensor is the component that makes anti-lock braking possible on your Soul. It monitors the rotational speed of each wheel in real time and sends that data to the Kia Soul ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Soul, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Kia Soul wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Kia Soul

The ABS wheel speed sensor on the Kia Soul is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Soul. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Soul ABS module interprets as wheel speed. On most modern Kia Soul vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Soul systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Kia Soul

• ABS warning light on your Kia Soul dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Soul ABS light
• ABS activating on your Kia Soul during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Soul, wheels lock under hard braking on wet or icy roads
• Speedometer on your Kia Soul reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Kia Soul ABS control module

Passive vs. Active ABS Sensors for the Kia Soul

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Kia Soul. Passive sensors use an analog signal and are found on older Soul vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Kia Soul vehicles manufactured after the mid-2000s and are required for full compatibility with modern Soul traction and stability control systems.

Why GeoBrakes for the Kia Soul ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Kia Soul wheel speed sensors. A sensor that generates the correct frequency for your Soul ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Kia Soul. Every sensor in the GeoBrakes catalogue is matched to the Kia Soul through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Soul.

Frequently Asked Questions - Kia Soul ABS Wheel Speed Sensor

Can I drive my Kia Soul with a faulty ABS wheel speed sensor?

You can drive the Kia Soul with a failed ABS sensor, but the anti-lock braking system on your Soul will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Kia Soul. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Kia Soul?

Use the GeoBrakes vehicle selector and enter the Kia Soul year, make, and model. The system displays only the sensors confirmed to fit the Kia Soul, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Soul to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Kia Soul at the same time?

No. ABS wheel speed sensors on the Kia Soul are independent components and only the failed unit needs to be replaced. However, if your Soul has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Kia Soul sensors for corrosion while the wheel is removed.