Jaguar Xfr S Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Jaguar Xfr S does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Xfr S dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Jaguar Xfr S, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Xfr S. On Jaguar Xfr S vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Xfr S.

What Is Included in the Jaguar Xfr S Brake Pad Wear Sensor Kit

The kit for your Jaguar Xfr S includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Xfr S monitoring circuit, the wiring connector mating with the Jaguar Xfr S brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Xfr S brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Jaguar Xfr S with sensor pre-assembled at factory-correct position on the Xfr S pad.

Why the Sensor Probe Specification Matters on the Jaguar Xfr S

A brake pad wear sensor on the Jaguar Xfr S is a calibrated component manufactured to trigger the Xfr S brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Jaguar Xfr S, sending drivers for an unnecessary brake service with significant Xfr S pad life remaining. Too short and it triggers late or not at all on the Xfr S, leaving the driver with no advance warning as the Jaguar Xfr S pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Jaguar Xfr S Is Due

• Brake pad warning light illuminated on your Jaguar Xfr S dashboard
• Xfr S warning light that stays on after a recent pad change, indicating sensor was not replaced on the Jaguar Xfr S
• Brake pads on your Jaguar Xfr S at or approaching minimum thickness on inspection
• Worn sensor probe visible on the Xfr S brake pad during a brake service inspection

Why GeoBrakes for the Jaguar Xfr S Wear Sensor Kit

Wear sensor compatibility for the Jaguar Xfr S is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Xfr S brake monitoring circuit exactly. A wrong-spec sensor on your Jaguar Xfr S either triggers warnings at the wrong pad thickness or fails to connect to the existing Xfr S harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Jaguar Xfr S exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Jaguar Xfr S Brake Pad Wear Sensor Kits

How do I know if my Jaguar Xfr S has electronic brake pad wear sensors?

Check your Jaguar Xfr S owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Jaguar Xfr S application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Jaguar Xfr S?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Jaguar Xfr S. If replacing Xfr S pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Jaguar Xfr S.

Will the brake warning light turn off automatically after installing a new sensor on my Jaguar Xfr S?

On most Jaguar Xfr S vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Jaguar Xfr S European platforms, a diagnostic scan tool reset may be required. Check your Xfr S service documentation if the light does not clear after installation.