Standard/OEIn stock
$53.00
1 items in stock
Quality For FREE Shipping
KNH-100104• Rear• Parking Brake Shoe Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks complete parking brake shoe kits confirmed to fit the Isuzu Oasis drum-in-hat rear parking brake system, combining OEM-grade parking brake shoes matched to the Oasis drum diameter with the return springs, shoe strut, adjusting screw assembly, and retaining clips needed for a correct, fully functional parking brake service on your Isuzu Oasis. Replacing shoes without the hardware is the leading cause of parking brake failure after service on the Oasis in American conditions.
Standard/OE$53.00
1 items in stock
Select your vehicle to see compatible products and accurate pricing
A parking brake shoe kit for the Isuzu Oasis restores complete parking brake function, not just the friction lining. The most common reason a freshly serviced Oasis parking brake fails to hold on a hill is not worn shoes: it is a seized adjuster that prevents the shoe-to-drum clearance from being correctly set after installation on your Isuzu Oasis. In the enclosed drum-in-hat cavity of the Oasis, road salt and meltwater concentrate corrosion on the adjuster threads, the return springs, and the strut. A kit that includes every hardware component alongside the shoes is the only way to guarantee the Isuzu Oasis parking brake performs correctly after service.
The kit for your Isuzu Oasis includes parking brake shoes with OEM-grade friction lining at the correct arc length and lining width for the Oasis drum-in-hat diameter, return springs that retract both shoes cleanly after the Oasis parking brake is released, hold-down hardware with springs and pins that locate the shoes while permitting actuation on your Isuzu Oasis, the parking brake strut connecting both shoes through the Oasis mechanism, the adjusting screw assembly setting correct shoe-to-drum clearance for reliable holding force on your Isuzu Oasis, and retaining clips and washers securing the strut and adjuster in correct operating position on the Oasis.
The parking brake shoe adjuster on the Isuzu Oasis sets the gap between the shoes and the inner drum surface of the Oasis rotor hat. In American winters, the drum-in-hat cavity of the Oasis traps road salt and moisture. The adjuster threads on your Isuzu Oasis corrode and seize, sometimes within a single winter season. A seized adjuster on the Oasis produces a parking brake that either drags against the drum when released or fails to hold the Isuzu Oasis on a slope when engaged.
Parking brake shoe kits for the Isuzu Oasis are among the most vehicle-specific brake components in the catalogue. The shoe arc length, lining width, spring rates, strut length, and adjuster thread specification for the Oasis are all determined by the specific drum-in-hat diameter of the Isuzu Oasis rotor. Every kit in the GeoBrakes catalogue is assembled for the Isuzu Oasis exact year and model, with zinc-plated or coated hardware components to resist the concentrated corrosion inside the Oasis drum-in-hat cavity.
How do I know if my Isuzu Oasis uses parking brake shoes?
Isuzu Oasis vehicles with four-wheel disc brakes often use a drum-in-hat parking brake requiring separate shoes. Some Oasis variants instead use a caliper-actuated parking brake. Use the GeoBrakes vehicle selector to confirm your Isuzu Oasis parking brake type and find the correct kit.
My Isuzu Oasis parking brake light stays on after I release it, do the shoes need replacing?
A warning light that stays on after full release on the Isuzu Oasis can indicate worn shoes, a faulty sensor, low brake fluid, or a stretched cable on the Oasis. If the Isuzu Oasis fails to hold on a slope, a shoe kit replacement combined with cable and adjuster inspection is the recommended starting point for your Oasis.
Can I adjust the parking brake on my Isuzu Oasis after installing a shoe kit without replacing the cable?
Yes, if the Oasis cable is in good condition and within its adjustment range. After correct shoe installation and adjuster setting on the Isuzu Oasis, adjust the cable until the brake holds firmly within three to five clicks of Oasis lever travel.