GeoBrakes stocks complete parking brake shoe kits confirmed to fit the Infiniti G25 drum-in-hat rear parking brake system, combining OEM-grade parking brake shoes matched to the G25 drum diameter with the return springs, shoe strut, adjusting screw assembly, and retaining clips needed for a correct, fully functional parking brake service on your Infiniti G25. Replacing shoes without the hardware is the leading cause of parking brake failure after service on the G25 in American conditions.
A parking brake shoe kit for the Infiniti G25 restores complete parking brake function, not just the friction lining. The most common reason a freshly serviced G25 parking brake fails to hold on a hill is not worn shoes: it is a seized adjuster that prevents the shoe-to-drum clearance from being correctly set after installation on your Infiniti G25. In the enclosed drum-in-hat cavity of the G25, road salt and meltwater concentrate corrosion on the adjuster threads, the return springs, and the strut. A kit that includes every hardware component alongside the shoes is the only way to guarantee the Infiniti G25 parking brake performs correctly after service.
The kit for your Infiniti G25 includes parking brake shoes with OEM-grade friction lining at the correct arc length and lining width for the G25 drum-in-hat diameter, return springs that retract both shoes cleanly after the G25 parking brake is released, hold-down hardware with springs and pins that locate the shoes while permitting actuation on your Infiniti G25, the parking brake strut connecting both shoes through the G25 mechanism, the adjusting screw assembly setting correct shoe-to-drum clearance for reliable holding force on your Infiniti G25, and retaining clips and washers securing the strut and adjuster in correct operating position on the G25.
The parking brake shoe adjuster on the Infiniti G25 sets the gap between the shoes and the inner drum surface of the G25 rotor hat. In American winters, the drum-in-hat cavity of the G25 traps road salt and moisture. The adjuster threads on your Infiniti G25 corrode and seize, sometimes within a single winter season. A seized adjuster on the G25 produces a parking brake that either drags against the drum when released or fails to hold the Infiniti G25 on a slope when engaged.
Parking brake shoe kits for the Infiniti G25 are among the most vehicle-specific brake components in the catalogue. The shoe arc length, lining width, spring rates, strut length, and adjuster thread specification for the G25 are all determined by the specific drum-in-hat diameter of the Infiniti G25 rotor. Every kit in the GeoBrakes catalogue is assembled for the Infiniti G25 exact year and model, with zinc-plated or coated hardware components to resist the concentrated corrosion inside the G25 drum-in-hat cavity.
How do I know if my Infiniti G25 uses parking brake shoes?
Infiniti G25 vehicles with four-wheel disc brakes often use a drum-in-hat parking brake requiring separate shoes. Some G25 variants instead use a caliper-actuated parking brake. Use the GeoBrakes vehicle selector to confirm your Infiniti G25 parking brake type and find the correct kit.
My Infiniti G25 parking brake light stays on after I release it, do the shoes need replacing?
A warning light that stays on after full release on the Infiniti G25 can indicate worn shoes, a faulty sensor, low brake fluid, or a stretched cable on the G25. If the Infiniti G25 fails to hold on a slope, a shoe kit replacement combined with cable and adjuster inspection is the recommended starting point for your G25.
Can I adjust the parking brake on my Infiniti G25 after installing a shoe kit without replacing the cable?
Yes, if the G25 cable is in good condition and within its adjustment range. After correct shoe installation and adjuster setting on the Infiniti G25, adjust the cable until the brake holds firmly within three to five clicks of G25 lever travel.