Hyundai Azera Disc Brake Caliper in US

The disc brake caliper on the Hyundai Azera is the hydraulic clamp at the centre of your Azera disc brake system. Every time you press the brake pedal on your Hyundai Azera, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Azera interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Hyundai Azera

• Hyundai Azera pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Azera feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Hyundai Azera axle wears significantly faster than its partner
• Brake drag on the Hyundai Azera, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Azera caliper body or around the piston boot
• Grinding or scraping from one Hyundai Azera wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Hyundai Azera

New OEM-Specification Calipers for the Hyundai Azera

New OEM-specification calipers for the Hyundai Azera are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Azera factory part. They offer the longest service life on your Hyundai Azera and are the strongest choice for higher-mileage Azera vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Hyundai Azera

Remanufactured calipers for the Hyundai Azera are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Hyundai Azera replacement applications and offer excellent value.

Why GeoBrakes for the Hyundai Azera Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Hyundai Azera to give you the right option for your Azera and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Hyundai Azera, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Hyundai Azera year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Hyundai Azera Disc Brake Caliper

Should I replace brake calipers on my Hyundai Azera in pairs?

It is generally recommended to replace calipers as an axle pair on the Hyundai Azera, both left and right on the same axle, to maintain balanced braking. If one Azera caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Hyundai Azera in US?

Hyundai Azera calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Azera caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Hyundai Azera well before that figure.

Can a sticking caliper on my Hyundai Azera damage my brake pads and rotors?

Yes. A Azera caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Hyundai Azera. This rapidly wears both the pad and rotor surface on your Azera and generates enough heat buildup to damage adjacent components over time.