Honda Hr V Disc Brake Caliper in US

The disc brake caliper on the Honda Hr V is the hydraulic clamp at the centre of your Hr V disc brake system. Every time you press the brake pedal on your Honda Hr V, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Hr V interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Honda Hr V

• Honda Hr V pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Hr V feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Honda Hr V axle wears significantly faster than its partner
• Brake drag on the Honda Hr V, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Hr V caliper body or around the piston boot
• Grinding or scraping from one Honda Hr V wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Honda Hr V

New OEM-Specification Calipers for the Honda Hr V

New OEM-specification calipers for the Honda Hr V are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Hr V factory part. They offer the longest service life on your Honda Hr V and are the strongest choice for higher-mileage Hr V vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Honda Hr V

Remanufactured calipers for the Honda Hr V are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Honda Hr V replacement applications and offer excellent value.

Why GeoBrakes for the Honda Hr V Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Honda Hr V to give you the right option for your Hr V and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Honda Hr V, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Honda Hr V year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Honda Hr V Disc Brake Caliper

Should I replace brake calipers on my Honda Hr V in pairs?

It is generally recommended to replace calipers as an axle pair on the Honda Hr V, both left and right on the same axle, to maintain balanced braking. If one Hr V caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Honda Hr V in US?

Honda Hr V calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Hr V caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Honda Hr V well before that figure.

Can a sticking caliper on my Honda Hr V damage my brake pads and rotors?

Yes. A Hr V caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Honda Hr V. This rapidly wears both the pad and rotor surface on your Hr V and generates enough heat buildup to damage adjacent components over time.