Honda Accord ABS Wheel Speed Sensor in US

Your Honda Accord ABS wheel speed sensor is the component that makes anti-lock braking possible on your Accord. It monitors the rotational speed of each wheel in real time and sends that data to the Honda Accord ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Accord, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Honda Accord wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Honda Accord

The ABS wheel speed sensor on the Honda Accord is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Accord. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Accord ABS module interprets as wheel speed. On most modern Honda Accord vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Accord systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Honda Accord

• ABS warning light on your Honda Accord dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Accord ABS light
• ABS activating on your Honda Accord during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Accord, wheels lock under hard braking on wet or icy roads
• Speedometer on your Honda Accord reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Honda Accord ABS control module

Passive vs. Active ABS Sensors for the Honda Accord

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Honda Accord. Passive sensors use an analog signal and are found on older Accord vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Honda Accord vehicles manufactured after the mid-2000s and are required for full compatibility with modern Accord traction and stability control systems.

Why GeoBrakes for the Honda Accord ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Honda Accord wheel speed sensors. A sensor that generates the correct frequency for your Accord ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Honda Accord. Every sensor in the GeoBrakes catalogue is matched to the Honda Accord through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Accord.

Frequently Asked Questions - Honda Accord ABS Wheel Speed Sensor

Can I drive my Honda Accord with a faulty ABS wheel speed sensor?

You can drive the Honda Accord with a failed ABS sensor, but the anti-lock braking system on your Accord will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Honda Accord. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Honda Accord?

Use the GeoBrakes vehicle selector and enter the Honda Accord year, make, and model. The system displays only the sensors confirmed to fit the Honda Accord, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Accord to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Honda Accord at the same time?

No. ABS wheel speed sensors on the Honda Accord are independent components and only the failed unit needs to be replaced. However, if your Accord has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Honda Accord sensors for corrosion while the wheel is removed.