Standard/OEIn stock
$12.40
10 items in stock
Quality For FREE Shipping
14-WC37781• Rear• Drum Brake Wheel Cylinder
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes carries OEM-grade drum brake wheel cylinders confirmed to fit the Gmc Savana 3500, the hydraulic actuators at the top of each drum brake assembly that convert brake fluid pressure into the mechanical force that pushes the Savana 3500 shoes against the drum. Available in new and remanufactured options for your Savana 3500, every cylinder is bored to OEM specifications
Standard/OE$12.40
10 items in stock
Select your vehicle to see compatible products and accurate pricing
The drum brake wheel cylinder on the Gmc Savana 3500 is the hydraulic component that actuates your Savana 3500 drum brake shoes every time you press the brake pedal. Brake fluid pressure from the master cylinder enters the Savana 3500 wheel cylinder and acts equally on two opposed pistons, pushing them outward simultaneously toward each shoe on the Gmc Savana 3500. A leaking Savana 3500 wheel cylinder actively bleeds hydraulic pressure from the brake circuit and contaminates the brake shoes with fluid, both of which directly compromise your ability to stop the Gmc Savana 3500.
Gmc Savana 3500 drum brake wheel cylinders are particularly vulnerable to corrosion in American road salt conditions. Salt water penetrates the dust boots over time on the Savana 3500, attacking the cylinder bore surface. Once the Gmc Savana 3500 bore is pitted, new piston cup seals cannot maintain a leak-free seal. Internally corroded Savana 3500 cylinders must be replaced, not rebuilt. Vehicles in high-salt urban environments often require Savana 3500 wheel cylinder replacement on the same service interval as brake shoes.
GeoBrakes stocks both new OEM-specification wheel cylinders and quality remanufactured units for the Gmc Savana 3500. New cylinders are the stronger choice for Savana 3500 vehicles in high-corrosion environments. Remanufactured units offer excellent value for Gmc Savana 3500 vehicles in moderate conditions where the original bore was sound. Our vehicle selector confirms the correct Savana 3500 cylinder, right bore diameter, port location, and mounting configuration, for your Savana 3500 drum brake assembly before purchase.
Can I drive my Gmc Savana 3500 with a leaking wheel cylinder?
No. A leaking Savana 3500 cylinder actively loses hydraulic pressure from the brake circuit, reducing stopping force on your Gmc Savana 3500 over time. Brake fluid that reaches the Savana 3500 shoes renders the friction material ineffective. A leaking Gmc Savana 3500 wheel cylinder is an immediate safety concern that requires urgent attention.
Should I replace both wheel cylinders on my Gmc Savana 3500 at the same time?
Yes. If one Savana 3500 cylinder has leaked or seized due to age and corrosion, the cylinder on the opposite side of the Gmc Savana 3500 has experienced identical conditions and is at a similar stage of deterioration. Replacing both ensures balanced hydraulic pressure on your Savana 3500 and avoids a second service call within months.
Do I need to bleed the brakes on my Gmc Savana 3500 after replacing a wheel cylinder?
Yes. Replacing a Savana 3500 wheel cylinder opens the hydraulic circuit, allowing air to enter. After installation on the Gmc Savana 3500, the entire rear brake circuit must be bled to remove all air and restore a firm, consistent brake pedal on your Savana 3500.