Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade brake drums confirmed to fit the Eagle Talon, the cast-iron components that form the friction surface for the Talon drum brake shoes. Available in standard and corrosion-coated configurations for your Talon, every drum is manufactured to the correct inner diameter, wall thickness, and surface finish for the Eagle Talon
Standard/OESelect your vehicle to see compatible products and accurate pricing
The brake drum on the Eagle Talon is the rotating cast-iron bowl that the Talon drum brake shoes press against to slow your vehicle. Mounted to the rear axle hub of your Eagle Talon, it spins with the wheel and provides the friction surface that the shoes contact under braking. Unlike brake rotors, which can be visually inspected from outside the wheel on many Talon vehicles, Eagle Talon brake drums fully enclose the shoe assembly, which means wear and damage often goes unnoticed until braking performance on the Eagle Talon is noticeably affected.
Standard OEM-Grade Drums for the Eagle Talon
Standard OEM-grade cast-iron drums for the Eagle Talon are manufactured to the original equipment diameter, wall thickness, and surface finish specification for your Talon. They are the direct replacement for the factory Talon drum with no modification required.
Coated Brake Drums for the Eagle Talon
Coated Eagle Talon brake drums feature a corrosion-resistant coating applied to the external drum surfaces of your Talon, the hat section, outer wall, and wheel mounting face. Surface rust is a common issue on Eagle Talon drum brake vehicles in US, particularly during periods of non-use in winter when moisture and salt collect inside the Talon wheel well. A coated drum on your Eagle Talon resists surface rust that can transfer to the wheel mounting face, making future drum removal significantly easier at the next Talon brake service.
Eagle Talon brake drum replacement requires matching the correct inner diameter, wall thickness, bolt circle, hub bore, and drum offset for your Talon. Errors in any of these dimensions produce incorrect shoe-to-drum clearance, uneven wear, and braking problems on the Eagle Talon. Our vehicle selector eliminates those risks by confirming the correct drum for the Eagle Talon exact year, make, model, and axle. Coated Talon drum options are available for vehicles with heavy salt exposure.
How long do brake drums last on a Eagle Talon?
Eagle Talon brake drums typically last 150,000 to 200,000 kilometres with periodic resurfacing, significantly longer than disc brake rotors on the Talon. Each resurfacing removes material from the Talon drum and reduces wall thickness. Once the Eagle Talon drum reaches its maximum allowable inner diameter, it must be replaced rather than turned again.
Should I replace brake drums on my Eagle Talon in pairs?
Yes. Replace both Eagle Talon drums on the same axle to maintain balanced braking. Drums of different inner diameters on the Talon create uneven friction forces, causing the Eagle Talon to pull to the fresher-drum side during braking.
Should I replace drums and shoes at the same time on my Eagle Talon?
Yes, it is strongly recommended for the Eagle Talon. New shoes on a scored or out-of-round Talon drum wear unevenly from day one. New Eagle Talon drums with old shoes that have worn to match the old drum surface will contact the new bore incorrectly. Replacing both together on the Talon ensures proper break-in and maximum service life from both components.