Standard/OE$22.40
10 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks complete drum brake wheel cylinder kits confirmed to fit the Dodge W200, pairing an OEM-grade wheel cylinder with every seal, boot, spring, and bleeder screw required for a full hydraulic actuator replacement on your W200. Every kit is sourced to the exact bore diameter and seal specification for the Dodge W200, built for American road salt conditions, and ships with a 100% fitment guarantee and free delivery on orders over $99.
Standard/OE$22.40
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Your Dodge W200 rear drum brakes rely on the wheel cylinder to convert hydraulic pressure into the mechanical force that pushes the brake shoes against the drum. When the wheel cylinder on your W200 leaks, seizes, or develops a soft piston seal, the rear brake circuit is compromised on that corner. A complete wheel cylinder kit from GeoBrakes restores every hydraulic component at that wheel simultaneously, delivering a brake circuit that holds pressure reliably through the next service interval on your Dodge W200.
The most common drum brake wheel cylinder mistake is replacing the cylinder on a Dodge W200 while reusing worn dust boots and deteriorated cup seals. In American conditions, where road salt attacks rubber components and corrodes bore surfaces on the W200, a new cylinder fitted with old boots is a failure waiting to happen. A complete wheel cylinder kit ensures every hydraulic component at that wheel is renewed together, regardless of whether the Dodge W200 has accumulated 80,000 or 180,000 kilometres of American road use.
Kit contents are specific to the Dodge W200 application and bore specification. A complete kit for your W200 includes the wheel cylinder at the OEM bore diameter for the Dodge W200, piston cup seals preventing fluid bypass past the pistons, dust boots protecting each piston end from road salt and moisture infiltration common in American winters on the W200, the internal spring maintaining cup seal contact under low pressure, and the bleeder screw for replacement if the original is corroded from road salt exposure on your Dodge W200.
Wheel cylinder bore diameter and seal specification must match the Dodge W200 exactly. An incorrect bore size or wrong seal compound produces immediate hydraulic failure on your W200. Every kit in the GeoBrakes catalogue is confirmed for the Dodge W200 year, axle position, and bore specification through our vehicle selector, with both new and remanufactured cylinder options available. New cylinders are recommended for Dodge W200 vehicles with heavy road salt exposure or where the original bore surface was corroded.
Can I rebuild the existing wheel cylinder on my Dodge W200 instead of replacing it?
A rebuild is only viable if the cylinder bore of the Dodge W200 is completely free of pitting and corrosion. In American conditions, where road salt routinely damages bore surfaces on the W200, a rebuild kit applied to a corroded cylinder will not hold pressure long-term. A complete replacement kit is the more reliable and cost-effective solution for most Dodge W200 applications.
Do I need to bleed the brakes on my Dodge W200 after installing the kit?
Yes. Installing a new wheel cylinder on the Dodge W200 opens the hydraulic circuit, allowing air to enter the system. After installation, the rear brake circuit must be bled at the W200 cylinder bleeder screw to purge all air and restore a firm brake pedal. Use fresh brake fluid meeting the Dodge W200 specification during the bleed procedure.
Should I replace wheel cylinders on both sides of my Dodge W200 at the same time?
Yes. If one wheel cylinder on your Dodge W200 has failed or leaked, the cylinder on the opposite rear wheel has been exposed to identical conditions for the same period. Replacing both as an axle pair on the W200 restores balanced hydraulic pressure and avoids a repeat service call within months.