Standard/OE$13.26
10 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes carries OEM-grade drum brake wheel cylinders confirmed to fit the Dodge Avenger, the hydraulic actuators at the top of each drum brake assembly that convert brake fluid pressure into the mechanical force that pushes the Avenger shoes against the drum. Available in new and remanufactured options for your Avenger, every cylinder is bored to OEM specifications
Standard/OE$13.26
10 items in stock
Select your vehicle to see compatible products and accurate pricing
The drum brake wheel cylinder on the Dodge Avenger is the hydraulic component that actuates your Avenger drum brake shoes every time you press the brake pedal. Brake fluid pressure from the master cylinder enters the Avenger wheel cylinder and acts equally on two opposed pistons, pushing them outward simultaneously toward each shoe on the Dodge Avenger. A leaking Avenger wheel cylinder actively bleeds hydraulic pressure from the brake circuit and contaminates the brake shoes with fluid, both of which directly compromise your ability to stop the Dodge Avenger.
Dodge Avenger drum brake wheel cylinders are particularly vulnerable to corrosion in American road salt conditions. Salt water penetrates the dust boots over time on the Avenger, attacking the cylinder bore surface. Once the Dodge Avenger bore is pitted, new piston cup seals cannot maintain a leak-free seal. Internally corroded Avenger cylinders must be replaced, not rebuilt. Vehicles in high-salt urban environments often require Avenger wheel cylinder replacement on the same service interval as brake shoes.
GeoBrakes stocks both new OEM-specification wheel cylinders and quality remanufactured units for the Dodge Avenger. New cylinders are the stronger choice for Avenger vehicles in high-corrosion environments. Remanufactured units offer excellent value for Dodge Avenger vehicles in moderate conditions where the original bore was sound. Our vehicle selector confirms the correct Avenger cylinder, right bore diameter, port location, and mounting configuration, for your Avenger drum brake assembly before purchase.
Can I drive my Dodge Avenger with a leaking wheel cylinder?
No. A leaking Avenger cylinder actively loses hydraulic pressure from the brake circuit, reducing stopping force on your Dodge Avenger over time. Brake fluid that reaches the Avenger shoes renders the friction material ineffective. A leaking Dodge Avenger wheel cylinder is an immediate safety concern that requires urgent attention.
Should I replace both wheel cylinders on my Dodge Avenger at the same time?
Yes. If one Avenger cylinder has leaked or seized due to age and corrosion, the cylinder on the opposite side of the Dodge Avenger has experienced identical conditions and is at a similar stage of deterioration. Replacing both ensures balanced hydraulic pressure on your Avenger and avoids a second service call within months.
Do I need to bleed the brakes on my Dodge Avenger after replacing a wheel cylinder?
Yes. Replacing a Avenger wheel cylinder opens the hydraulic circuit, allowing air to enter. After installation on the Dodge Avenger, the entire rear brake circuit must be bled to remove all air and restore a firm, consistent brake pedal on your Avenger.