Chrysler Voyager Disc Brake Caliper in US

The disc brake caliper on the Chrysler Voyager is the hydraulic clamp at the centre of your Voyager disc brake system. Every time you press the brake pedal on your Chrysler Voyager, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Voyager interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Chrysler Voyager

• Chrysler Voyager pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Voyager feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Chrysler Voyager axle wears significantly faster than its partner
• Brake drag on the Chrysler Voyager, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Voyager caliper body or around the piston boot
• Grinding or scraping from one Chrysler Voyager wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Chrysler Voyager

New OEM-Specification Calipers for the Chrysler Voyager

New OEM-specification calipers for the Chrysler Voyager are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Voyager factory part. They offer the longest service life on your Chrysler Voyager and are the strongest choice for higher-mileage Voyager vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Chrysler Voyager

Remanufactured calipers for the Chrysler Voyager are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Chrysler Voyager replacement applications and offer excellent value.

Why GeoBrakes for the Chrysler Voyager Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Chrysler Voyager to give you the right option for your Voyager and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Chrysler Voyager, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Chrysler Voyager year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Chrysler Voyager Disc Brake Caliper

Should I replace brake calipers on my Chrysler Voyager in pairs?

It is generally recommended to replace calipers as an axle pair on the Chrysler Voyager, both left and right on the same axle, to maintain balanced braking. If one Voyager caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Chrysler Voyager in US?

Chrysler Voyager calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Voyager caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Chrysler Voyager well before that figure.

Can a sticking caliper on my Chrysler Voyager damage my brake pads and rotors?

Yes. A Voyager caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Chrysler Voyager. This rapidly wears both the pad and rotor surface on your Voyager and generates enough heat buildup to damage adjacent components over time.