Chrysler Town Country ABS Wheel Speed Sensor in US

Your Chrysler Town Country ABS wheel speed sensor is the component that makes anti-lock braking possible on your Town Country. It monitors the rotational speed of each wheel in real time and sends that data to the Chrysler Town Country ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Town Country, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Chrysler Town Country wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Chrysler Town Country

The ABS wheel speed sensor on the Chrysler Town Country is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Town Country. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Town Country ABS module interprets as wheel speed. On most modern Chrysler Town Country vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Town Country systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Chrysler Town Country

• ABS warning light on your Chrysler Town Country dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Town Country ABS light
• ABS activating on your Chrysler Town Country during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Town Country, wheels lock under hard braking on wet or icy roads
• Speedometer on your Chrysler Town Country reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Chrysler Town Country ABS control module

Passive vs. Active ABS Sensors for the Chrysler Town Country

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Chrysler Town Country. Passive sensors use an analog signal and are found on older Town Country vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Chrysler Town Country vehicles manufactured after the mid-2000s and are required for full compatibility with modern Town Country traction and stability control systems.

Why GeoBrakes for the Chrysler Town Country ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Chrysler Town Country wheel speed sensors. A sensor that generates the correct frequency for your Town Country ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Chrysler Town Country. Every sensor in the GeoBrakes catalogue is matched to the Chrysler Town Country through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Town Country.

Frequently Asked Questions - Chrysler Town Country ABS Wheel Speed Sensor

Can I drive my Chrysler Town Country with a faulty ABS wheel speed sensor?

You can drive the Chrysler Town Country with a failed ABS sensor, but the anti-lock braking system on your Town Country will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Chrysler Town Country. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Chrysler Town Country?

Use the GeoBrakes vehicle selector and enter the Chrysler Town Country year, make, and model. The system displays only the sensors confirmed to fit the Chrysler Town Country, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Town Country to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Chrysler Town Country at the same time?

No. ABS wheel speed sensors on the Chrysler Town Country are independent components and only the failed unit needs to be replaced. However, if your Town Country has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Chrysler Town Country sensors for corrosion while the wheel is removed.