Chrysler Sebring Drum Brake Wheel Cylinder Kit in US

Your Chrysler Sebring rear drum brakes rely on the wheel cylinder to convert hydraulic pressure into the mechanical force that pushes the brake shoes against the drum. When the wheel cylinder on your Sebring leaks, seizes, or develops a soft piston seal, the rear brake circuit is compromised on that corner. A complete wheel cylinder kit from GeoBrakes restores every hydraulic component at that wheel simultaneously, delivering a brake circuit that holds pressure reliably through the next service interval on your Chrysler Sebring.

Why a Complete Kit Is the Right Choice for Your Chrysler Sebring

The most common drum brake wheel cylinder mistake is replacing the cylinder on a Chrysler Sebring while reusing worn dust boots and deteriorated cup seals. In American conditions, where road salt attacks rubber components and corrodes bore surfaces on the Sebring, a new cylinder fitted with old boots is a failure waiting to happen. A complete wheel cylinder kit ensures every hydraulic component at that wheel is renewed together, regardless of whether the Chrysler Sebring has accumulated 80,000 or 180,000 kilometres of American road use.

What Is Included in the Chrysler Sebring Wheel Cylinder Kit

Kit contents are specific to the Chrysler Sebring application and bore specification. A complete kit for your Sebring includes the wheel cylinder at the OEM bore diameter for the Chrysler Sebring, piston cup seals preventing fluid bypass past the pistons, dust boots protecting each piston end from road salt and moisture infiltration common in American winters on the Sebring, the internal spring maintaining cup seal contact under low pressure, and the bleeder screw for replacement if the original is corroded from road salt exposure on your Chrysler Sebring.

Signs the Wheel Cylinder Kit on Your Chrysler Sebring Is Due

• Brake fluid visible inside the rear drum of your Chrysler Sebring, wet shoes or fluid pooling at the drum base
• Soft or progressively lowering brake pedal on your Sebring with no other obvious hydraulic cause
• Chrysler Sebring pulling to one side during braking, asymmetric hydraulic actuation across the rear axle
• Spongy Sebring brake pedal from air entering the circuit through a failing piston seal
• Brake drag and heat at one rear wheel of your Chrysler Sebring, seized piston keeping the shoe partially engaged
• Fluid level dropping in the Sebring reservoir without any visible external leak elsewhere

Why GeoBrakes for the Chrysler Sebring Wheel Cylinder Kit

Wheel cylinder bore diameter and seal specification must match the Chrysler Sebring exactly. An incorrect bore size or wrong seal compound produces immediate hydraulic failure on your Sebring. Every kit in the GeoBrakes catalogue is confirmed for the Chrysler Sebring year, axle position, and bore specification through our vehicle selector, with both new and remanufactured cylinder options available. New cylinders are recommended for Chrysler Sebring vehicles with heavy road salt exposure or where the original bore surface was corroded.

Frequently Asked Questions - Chrysler Sebring Wheel Cylinder Kits

Can I rebuild the existing wheel cylinder on my Chrysler Sebring instead of replacing it?

A rebuild is only viable if the cylinder bore of the Chrysler Sebring is completely free of pitting and corrosion. In American conditions, where road salt routinely damages bore surfaces on the Sebring, a rebuild kit applied to a corroded cylinder will not hold pressure long-term. A complete replacement kit is the more reliable and cost-effective solution for most Chrysler Sebring applications.

Do I need to bleed the brakes on my Chrysler Sebring after installing the kit?

Yes. Installing a new wheel cylinder on the Chrysler Sebring opens the hydraulic circuit, allowing air to enter the system. After installation, the rear brake circuit must be bled at the Sebring cylinder bleeder screw to purge all air and restore a firm brake pedal. Use fresh brake fluid meeting the Chrysler Sebring specification during the bleed procedure.

Should I replace wheel cylinders on both sides of my Chrysler Sebring at the same time?

Yes. If one wheel cylinder on your Chrysler Sebring has failed or leaked, the cylinder on the opposite rear wheel has been exposed to identical conditions for the same period. Replacing both as an axle pair on the Sebring restores balanced hydraulic pressure and avoids a repeat service call within months.