Standard/OEIn stock
$79.82
10 items in stock
Quality For FREE Shipping
KNH-100087• Rear• Parking Brake Shoe Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks complete parking brake shoe kits confirmed to fit the Chevrolet Monte Carlo drum-in-hat rear parking brake system, combining OEM-grade parking brake shoes matched to the Monte Carlo drum diameter with the return springs, shoe strut, adjusting screw assembly, and retaining clips needed for a correct, fully functional parking brake service on your Chevrolet Monte Carlo. Replacing shoes without the hardware is the leading cause of parking brake failure after service on the Monte Carlo in American conditions.
Standard/OE$79.82
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A parking brake shoe kit for the Chevrolet Monte Carlo restores complete parking brake function, not just the friction lining. The most common reason a freshly serviced Monte Carlo parking brake fails to hold on a hill is not worn shoes: it is a seized adjuster that prevents the shoe-to-drum clearance from being correctly set after installation on your Chevrolet Monte Carlo. In the enclosed drum-in-hat cavity of the Monte Carlo, road salt and meltwater concentrate corrosion on the adjuster threads, the return springs, and the strut. A kit that includes every hardware component alongside the shoes is the only way to guarantee the Chevrolet Monte Carlo parking brake performs correctly after service.
The kit for your Chevrolet Monte Carlo includes parking brake shoes with OEM-grade friction lining at the correct arc length and lining width for the Monte Carlo drum-in-hat diameter, return springs that retract both shoes cleanly after the Monte Carlo parking brake is released, hold-down hardware with springs and pins that locate the shoes while permitting actuation on your Chevrolet Monte Carlo, the parking brake strut connecting both shoes through the Monte Carlo mechanism, the adjusting screw assembly setting correct shoe-to-drum clearance for reliable holding force on your Chevrolet Monte Carlo, and retaining clips and washers securing the strut and adjuster in correct operating position on the Monte Carlo.
The parking brake shoe adjuster on the Chevrolet Monte Carlo sets the gap between the shoes and the inner drum surface of the Monte Carlo rotor hat. In American winters, the drum-in-hat cavity of the Monte Carlo traps road salt and moisture. The adjuster threads on your Chevrolet Monte Carlo corrode and seize, sometimes within a single winter season. A seized adjuster on the Monte Carlo produces a parking brake that either drags against the drum when released or fails to hold the Chevrolet Monte Carlo on a slope when engaged.
Parking brake shoe kits for the Chevrolet Monte Carlo are among the most vehicle-specific brake components in the catalogue. The shoe arc length, lining width, spring rates, strut length, and adjuster thread specification for the Monte Carlo are all determined by the specific drum-in-hat diameter of the Chevrolet Monte Carlo rotor. Every kit in the GeoBrakes catalogue is assembled for the Chevrolet Monte Carlo exact year and model, with zinc-plated or coated hardware components to resist the concentrated corrosion inside the Monte Carlo drum-in-hat cavity.
How do I know if my Chevrolet Monte Carlo uses parking brake shoes?
Chevrolet Monte Carlo vehicles with four-wheel disc brakes often use a drum-in-hat parking brake requiring separate shoes. Some Monte Carlo variants instead use a caliper-actuated parking brake. Use the GeoBrakes vehicle selector to confirm your Chevrolet Monte Carlo parking brake type and find the correct kit.
My Chevrolet Monte Carlo parking brake light stays on after I release it, do the shoes need replacing?
A warning light that stays on after full release on the Chevrolet Monte Carlo can indicate worn shoes, a faulty sensor, low brake fluid, or a stretched cable on the Monte Carlo. If the Chevrolet Monte Carlo fails to hold on a slope, a shoe kit replacement combined with cable and adjuster inspection is the recommended starting point for your Monte Carlo.
Can I adjust the parking brake on my Chevrolet Monte Carlo after installing a shoe kit without replacing the cable?
Yes, if the Monte Carlo cable is in good condition and within its adjustment range. After correct shoe installation and adjuster setting on the Chevrolet Monte Carlo, adjust the cable until the brake holds firmly within three to five clicks of Monte Carlo lever travel.