Chevrolet Impala Disc Brake Caliper in US

The disc brake caliper on the Chevrolet Impala is the hydraulic clamp at the centre of your Impala disc brake system. Every time you press the brake pedal on your Chevrolet Impala, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Impala interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Chevrolet Impala

• Chevrolet Impala pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Impala feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Chevrolet Impala axle wears significantly faster than its partner
• Brake drag on the Chevrolet Impala, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Impala caliper body or around the piston boot
• Grinding or scraping from one Chevrolet Impala wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Chevrolet Impala

New OEM-Specification Calipers for the Chevrolet Impala

New OEM-specification calipers for the Chevrolet Impala are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Impala factory part. They offer the longest service life on your Chevrolet Impala and are the strongest choice for higher-mileage Impala vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Chevrolet Impala

Remanufactured calipers for the Chevrolet Impala are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Chevrolet Impala replacement applications and offer excellent value.

Why GeoBrakes for the Chevrolet Impala Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Chevrolet Impala to give you the right option for your Impala and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Chevrolet Impala, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Chevrolet Impala year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Chevrolet Impala Disc Brake Caliper

Should I replace brake calipers on my Chevrolet Impala in pairs?

It is generally recommended to replace calipers as an axle pair on the Chevrolet Impala, both left and right on the same axle, to maintain balanced braking. If one Impala caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Chevrolet Impala in US?

Chevrolet Impala calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Impala caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Chevrolet Impala well before that figure.

Can a sticking caliper on my Chevrolet Impala damage my brake pads and rotors?

Yes. A Impala caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Chevrolet Impala. This rapidly wears both the pad and rotor surface on your Impala and generates enough heat buildup to damage adjacent components over time.