Chevrolet Cruze Limited ABS Wheel Speed Sensor in US

Your Chevrolet Cruze Limited ABS wheel speed sensor is the component that makes anti-lock braking possible on your Cruze Limited. It monitors the rotational speed of each wheel in real time and sends that data to the Chevrolet Cruze Limited ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Cruze Limited, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Chevrolet Cruze Limited wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Chevrolet Cruze Limited

The ABS wheel speed sensor on the Chevrolet Cruze Limited is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Cruze Limited. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Cruze Limited ABS module interprets as wheel speed. On most modern Chevrolet Cruze Limited vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Cruze Limited systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Chevrolet Cruze Limited

• ABS warning light on your Chevrolet Cruze Limited dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Cruze Limited ABS light
• ABS activating on your Chevrolet Cruze Limited during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Cruze Limited, wheels lock under hard braking on wet or icy roads
• Speedometer on your Chevrolet Cruze Limited reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Chevrolet Cruze Limited ABS control module

Passive vs. Active ABS Sensors for the Chevrolet Cruze Limited

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Chevrolet Cruze Limited. Passive sensors use an analog signal and are found on older Cruze Limited vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Chevrolet Cruze Limited vehicles manufactured after the mid-2000s and are required for full compatibility with modern Cruze Limited traction and stability control systems.

Why GeoBrakes for the Chevrolet Cruze Limited ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Chevrolet Cruze Limited wheel speed sensors. A sensor that generates the correct frequency for your Cruze Limited ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Chevrolet Cruze Limited. Every sensor in the GeoBrakes catalogue is matched to the Chevrolet Cruze Limited through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Cruze Limited.

Frequently Asked Questions - Chevrolet Cruze Limited ABS Wheel Speed Sensor

Can I drive my Chevrolet Cruze Limited with a faulty ABS wheel speed sensor?

You can drive the Chevrolet Cruze Limited with a failed ABS sensor, but the anti-lock braking system on your Cruze Limited will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Chevrolet Cruze Limited. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Chevrolet Cruze Limited?

Use the GeoBrakes vehicle selector and enter the Chevrolet Cruze Limited year, make, and model. The system displays only the sensors confirmed to fit the Chevrolet Cruze Limited, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Cruze Limited to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Chevrolet Cruze Limited at the same time?

No. ABS wheel speed sensors on the Chevrolet Cruze Limited are independent components and only the failed unit needs to be replaced. However, if your Cruze Limited has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Chevrolet Cruze Limited sensors for corrosion while the wheel is removed.