Standard/OEIn stock
$82.08
10 items in stock
Quality For FREE Shipping
KNH-100088• Rear• Parking Brake Shoe Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks complete parking brake shoe kits confirmed to fit the Buick Rendezvous drum-in-hat rear parking brake system, combining OEM-grade parking brake shoes matched to the Rendezvous drum diameter with the return springs, shoe strut, adjusting screw assembly, and retaining clips needed for a correct, fully functional parking brake service on your Buick Rendezvous. Replacing shoes without the hardware is the leading cause of parking brake failure after service on the Rendezvous in American conditions.
Standard/OE$82.08
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A parking brake shoe kit for the Buick Rendezvous restores complete parking brake function, not just the friction lining. The most common reason a freshly serviced Rendezvous parking brake fails to hold on a hill is not worn shoes: it is a seized adjuster that prevents the shoe-to-drum clearance from being correctly set after installation on your Buick Rendezvous. In the enclosed drum-in-hat cavity of the Rendezvous, road salt and meltwater concentrate corrosion on the adjuster threads, the return springs, and the strut. A kit that includes every hardware component alongside the shoes is the only way to guarantee the Buick Rendezvous parking brake performs correctly after service.
The kit for your Buick Rendezvous includes parking brake shoes with OEM-grade friction lining at the correct arc length and lining width for the Rendezvous drum-in-hat diameter, return springs that retract both shoes cleanly after the Rendezvous parking brake is released, hold-down hardware with springs and pins that locate the shoes while permitting actuation on your Buick Rendezvous, the parking brake strut connecting both shoes through the Rendezvous mechanism, the adjusting screw assembly setting correct shoe-to-drum clearance for reliable holding force on your Buick Rendezvous, and retaining clips and washers securing the strut and adjuster in correct operating position on the Rendezvous.
The parking brake shoe adjuster on the Buick Rendezvous sets the gap between the shoes and the inner drum surface of the Rendezvous rotor hat. In American winters, the drum-in-hat cavity of the Rendezvous traps road salt and moisture. The adjuster threads on your Buick Rendezvous corrode and seize, sometimes within a single winter season. A seized adjuster on the Rendezvous produces a parking brake that either drags against the drum when released or fails to hold the Buick Rendezvous on a slope when engaged.
Parking brake shoe kits for the Buick Rendezvous are among the most vehicle-specific brake components in the catalogue. The shoe arc length, lining width, spring rates, strut length, and adjuster thread specification for the Rendezvous are all determined by the specific drum-in-hat diameter of the Buick Rendezvous rotor. Every kit in the GeoBrakes catalogue is assembled for the Buick Rendezvous exact year and model, with zinc-plated or coated hardware components to resist the concentrated corrosion inside the Rendezvous drum-in-hat cavity.
How do I know if my Buick Rendezvous uses parking brake shoes?
Buick Rendezvous vehicles with four-wheel disc brakes often use a drum-in-hat parking brake requiring separate shoes. Some Rendezvous variants instead use a caliper-actuated parking brake. Use the GeoBrakes vehicle selector to confirm your Buick Rendezvous parking brake type and find the correct kit.
My Buick Rendezvous parking brake light stays on after I release it, do the shoes need replacing?
A warning light that stays on after full release on the Buick Rendezvous can indicate worn shoes, a faulty sensor, low brake fluid, or a stretched cable on the Rendezvous. If the Buick Rendezvous fails to hold on a slope, a shoe kit replacement combined with cable and adjuster inspection is the recommended starting point for your Rendezvous.
Can I adjust the parking brake on my Buick Rendezvous after installing a shoe kit without replacing the cable?
Yes, if the Rendezvous cable is in good condition and within its adjustment range. After correct shoe installation and adjuster setting on the Buick Rendezvous, adjust the cable until the brake holds firmly within three to five clicks of Rendezvous lever travel.