GeoBrakes stocks a complete range of passive and active ABS wheel speed sensors confirmed to fit the Buick Regal Tourx, each sourced to OEM specifications for direct-fit installation and reliable ABS performance on your Regal Tourx. Every Buick Regal Tourx sensor is compatible with traction control and stability control systems.
Your Buick Regal Tourx ABS wheel speed sensor is the component that makes anti-lock braking possible on your Regal Tourx. It monitors the rotational speed of each wheel in real time and sends that data to the Buick Regal Tourx ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Regal Tourx, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Buick Regal Tourx wheel speed data is reaching the module.
The ABS wheel speed sensor on the Buick Regal Tourx is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Regal Tourx. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Regal Tourx ABS module interprets as wheel speed. On most modern Buick Regal Tourx vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Regal Tourx systems simultaneously.
GeoBrakes stocks both passive and active ABS wheel speed sensors for the Buick Regal Tourx. Passive sensors use an analog signal and are found on older Regal Tourx vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Buick Regal Tourx vehicles manufactured after the mid-2000s and are required for full compatibility with modern Regal Tourx traction and stability control systems.
Signal accuracy matters as much as fitment with Buick Regal Tourx wheel speed sensors. A sensor that generates the correct frequency for your Regal Tourx ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Buick Regal Tourx. Every sensor in the GeoBrakes catalogue is matched to the Buick Regal Tourx through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Regal Tourx.
Can I drive my Buick Regal Tourx with a faulty ABS wheel speed sensor?
You can drive the Buick Regal Tourx with a failed ABS sensor, but the anti-lock braking system on your Regal Tourx will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Buick Regal Tourx. Replacing a failed sensor promptly is strongly recommended, particularly before winter.
How do I find the right ABS sensor for my Buick Regal Tourx?
Use the GeoBrakes vehicle selector and enter the Buick Regal Tourx year, make, and model. The system displays only the sensors confirmed to fit the Buick Regal Tourx, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Regal Tourx to avoid receiving the wrong unit.
Do I need to replace all four ABS sensors on my Buick Regal Tourx at the same time?
No. ABS wheel speed sensors on the Buick Regal Tourx are independent components and only the failed unit needs to be replaced. However, if your Regal Tourx has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Buick Regal Tourx sensors for corrosion while the wheel is removed.