Standard/OEIn stock
$54.27
10 items in stock
Quality For FREE Shipping
KSE-100270• Rear• Disc Brake Pad Wear Sensor Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake pad wear sensor kits confirmed to fit the Brightdrop Zevo, combining the wear sensor probe manufactured to the exact OEM probe length and contact resistance for the Zevo with connector hardware, retaining clips, and in pad-inclusive configurations the brake pads themselves, so the complete brake monitoring system on your Brightdrop Zevo is restored correctly in a single service.
Standard/OE$54.27
10 items in stock
Select your vehicle to see compatible products and accurate pricing
A brake pad wear sensor kit for the Brightdrop Zevo does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Zevo dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Brightdrop Zevo, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Zevo. On Brightdrop Zevo vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Zevo.
The kit for your Brightdrop Zevo includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Zevo monitoring circuit, the wiring connector mating with the Brightdrop Zevo brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Zevo brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Brightdrop Zevo with sensor pre-assembled at factory-correct position on the Zevo pad.
A brake pad wear sensor on the Brightdrop Zevo is a calibrated component manufactured to trigger the Zevo brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Brightdrop Zevo, sending drivers for an unnecessary brake service with significant Zevo pad life remaining. Too short and it triggers late or not at all on the Zevo, leaving the driver with no advance warning as the Brightdrop Zevo pads approach the metal backing plate.
Wear sensor compatibility for the Brightdrop Zevo is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Zevo brake monitoring circuit exactly. A wrong-spec sensor on your Brightdrop Zevo either triggers warnings at the wrong pad thickness or fails to connect to the existing Zevo harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Brightdrop Zevo exact year and model, with front and rear positions listed separately.
How do I know if my Brightdrop Zevo has electronic brake pad wear sensors?
Check your Brightdrop Zevo owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Brightdrop Zevo application requires an electronic sensor kit.
Can I buy the wear sensor separately from the brake pads for my Brightdrop Zevo?
Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Brightdrop Zevo. If replacing Zevo pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Brightdrop Zevo.
Will the brake warning light turn off automatically after installing a new sensor on my Brightdrop Zevo?
On most Brightdrop Zevo vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Brightdrop Zevo European platforms, a diagnostic scan tool reset may be required. Check your Zevo service documentation if the light does not clear after installation.