Bmw X6 Disc Brake Caliper Kit in US

When a caliper on the Bmw X6 seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your X6 keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Bmw X6 is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Bmw X6 together.

What Is Included in the Bmw X6 Disc Brake Caliper Kit

The kit for your Bmw X6 includes the disc brake caliper at the correct left or right hand specification for the X6, either new OEM-spec or quality remanufactured to the Bmw X6 piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the X6 caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Bmw X6, brake lubricant for correct pin and shim installation on your X6, and copper washers or banjo bolt seals for the brake hose connection where required by the Bmw X6 application.

When a Caliper Kit Is the Correct Service Choice for the Bmw X6

A caliper kit is the right call for the Bmw X6 in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your X6 are already compromised. During a high-mileage X6 overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Bmw X6 are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the X6 brake pad renders the friction material permanently ineffective on your Bmw X6.

New vs. Remanufactured Caliper for the Bmw X6

New OEM-specification calipers for the Bmw X6 are manufactured from fresh materials with no prior service history, the strongest choice for X6 vehicles in high-corrosion environments. Remanufactured calipers use original Bmw X6 housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most X6 replacement applications.

Signs the Caliper Kit on Your Bmw X6 Is Due

• Bmw X6 pulling to one side during braking, one caliper applying more force than the other
• One brake pad on your X6 worn significantly more than its pair on the same axle
• Brake drag on the Bmw X6 with a wheel that runs hot after normal driving
• Soft or sinking X6 brake pedal caused by a caliper piston seal leak
• Brake fluid visible around the Bmw X6 caliper piston boot
• Persistent metallic dragging noise from one X6 corner not explained by worn pads

Why GeoBrakes for the Bmw X6 Caliper Kit

Calipers for the Bmw X6 are the most position-specific brake component in the catalogue. Left and right calipers for the X6 are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Bmw X6 exact year, axle position, and left or right side before purchase.

Frequently Asked Questions - Bmw X6 Disc Brake Caliper Kits

Should I replace both calipers on my Bmw X6 at the same time?

It is strongly recommended. If one caliper on the Bmw X6 has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your X6. Replacing both restores balanced, even braking and eliminates the risk of the second X6 caliper failing shortly after the first is replaced.

Do I need to bleed the brakes on my Bmw X6 after installing a caliper kit?

Yes. Opening the hydraulic circuit on the Bmw X6 to install the new caliper allows air to enter. After installation, the brake circuit on the X6 must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Bmw X6.

What is the difference between a new and remanufactured caliper in the Bmw X6 kit?

A new caliper for the Bmw X6 has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original X6 housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Bmw X6 applications.