Bmw X4 ABS Wheel Speed Sensor in US

Your Bmw X4 ABS wheel speed sensor is the component that makes anti-lock braking possible on your X4. It monitors the rotational speed of each wheel in real time and sends that data to the Bmw X4 ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your X4, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Bmw X4 wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Bmw X4

The ABS wheel speed sensor on the Bmw X4 is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your X4. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the X4 ABS module interprets as wheel speed. On most modern Bmw X4 vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple X4 systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Bmw X4

• ABS warning light on your Bmw X4 dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the X4 ABS light
• ABS activating on your Bmw X4 during normal stops at low speed where it should not engage
• Complete ABS deactivation on the X4, wheels lock under hard braking on wet or icy roads
• Speedometer on your Bmw X4 reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Bmw X4 ABS control module

Passive vs. Active ABS Sensors for the Bmw X4

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Bmw X4. Passive sensors use an analog signal and are found on older X4 vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Bmw X4 vehicles manufactured after the mid-2000s and are required for full compatibility with modern X4 traction and stability control systems.

Why GeoBrakes for the Bmw X4 ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Bmw X4 wheel speed sensors. A sensor that generates the correct frequency for your X4 ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Bmw X4. Every sensor in the GeoBrakes catalogue is matched to the Bmw X4 through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your X4.

Frequently Asked Questions - Bmw X4 ABS Wheel Speed Sensor

Can I drive my Bmw X4 with a faulty ABS wheel speed sensor?

You can drive the Bmw X4 with a failed ABS sensor, but the anti-lock braking system on your X4 will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Bmw X4. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Bmw X4?

Use the GeoBrakes vehicle selector and enter the Bmw X4 year, make, and model. The system displays only the sensors confirmed to fit the Bmw X4, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your X4 to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Bmw X4 at the same time?

No. ABS wheel speed sensors on the Bmw X4 are independent components and only the failed unit needs to be replaced. However, if your X4 has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Bmw X4 sensors for corrosion while the wheel is removed.