Standard/OEIn stock
$75.34
5 items in stock
Quality For FREE Shipping
KSE-100319• Rear• Disc Brake Pad Wear Sensor Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake pad wear sensor kits confirmed to fit the Bmw Alpina B7l, combining the wear sensor probe manufactured to the exact OEM probe length and contact resistance for the Alpina B7l with connector hardware, retaining clips, and in pad-inclusive configurations the brake pads themselves, so the complete brake monitoring system on your Bmw Alpina B7l is restored correctly in a single service.
Standard/OE$75.34
5 items in stock
Select your vehicle to see compatible products and accurate pricing
A brake pad wear sensor kit for the Bmw Alpina B7l does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Alpina B7l dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Bmw Alpina B7l, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Alpina B7l. On Bmw Alpina B7l vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Alpina B7l.
The kit for your Bmw Alpina B7l includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Alpina B7l monitoring circuit, the wiring connector mating with the Bmw Alpina B7l brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Alpina B7l brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Bmw Alpina B7l with sensor pre-assembled at factory-correct position on the Alpina B7l pad.
A brake pad wear sensor on the Bmw Alpina B7l is a calibrated component manufactured to trigger the Alpina B7l brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Bmw Alpina B7l, sending drivers for an unnecessary brake service with significant Alpina B7l pad life remaining. Too short and it triggers late or not at all on the Alpina B7l, leaving the driver with no advance warning as the Bmw Alpina B7l pads approach the metal backing plate.
Wear sensor compatibility for the Bmw Alpina B7l is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Alpina B7l brake monitoring circuit exactly. A wrong-spec sensor on your Bmw Alpina B7l either triggers warnings at the wrong pad thickness or fails to connect to the existing Alpina B7l harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Bmw Alpina B7l exact year and model, with front and rear positions listed separately.
How do I know if my Bmw Alpina B7l has electronic brake pad wear sensors?
Check your Bmw Alpina B7l owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Bmw Alpina B7l application requires an electronic sensor kit.
Can I buy the wear sensor separately from the brake pads for my Bmw Alpina B7l?
Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Bmw Alpina B7l. If replacing Alpina B7l pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Bmw Alpina B7l.
Will the brake warning light turn off automatically after installing a new sensor on my Bmw Alpina B7l?
On most Bmw Alpina B7l vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Bmw Alpina B7l European platforms, a diagnostic scan tool reset may be required. Check your Alpina B7l service documentation if the light does not clear after installation.