Bmw 750li Xdrive Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Bmw 750li Xdrive does one critical thing that a pad change alone cannot: it ensures the brake warning light on your 750li Xdrive dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Bmw 750li Xdrive, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your 750li Xdrive. On Bmw 750li Xdrive vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the 750li Xdrive.

What Is Included in the Bmw 750li Xdrive Brake Pad Wear Sensor Kit

The kit for your Bmw 750li Xdrive includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the 750li Xdrive monitoring circuit, the wiring connector mating with the Bmw 750li Xdrive brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the 750li Xdrive brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Bmw 750li Xdrive with sensor pre-assembled at factory-correct position on the 750li Xdrive pad.

Why the Sensor Probe Specification Matters on the Bmw 750li Xdrive

A brake pad wear sensor on the Bmw 750li Xdrive is a calibrated component manufactured to trigger the 750li Xdrive brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Bmw 750li Xdrive, sending drivers for an unnecessary brake service with significant 750li Xdrive pad life remaining. Too short and it triggers late or not at all on the 750li Xdrive, leaving the driver with no advance warning as the Bmw 750li Xdrive pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Bmw 750li Xdrive Is Due

• Brake pad warning light illuminated on your Bmw 750li Xdrive dashboard
• 750li Xdrive warning light that stays on after a recent pad change, indicating sensor was not replaced on the Bmw 750li Xdrive
• Brake pads on your Bmw 750li Xdrive at or approaching minimum thickness on inspection
• Worn sensor probe visible on the 750li Xdrive brake pad during a brake service inspection

Why GeoBrakes for the Bmw 750li Xdrive Wear Sensor Kit

Wear sensor compatibility for the Bmw 750li Xdrive is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the 750li Xdrive brake monitoring circuit exactly. A wrong-spec sensor on your Bmw 750li Xdrive either triggers warnings at the wrong pad thickness or fails to connect to the existing 750li Xdrive harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Bmw 750li Xdrive exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Bmw 750li Xdrive Brake Pad Wear Sensor Kits

How do I know if my Bmw 750li Xdrive has electronic brake pad wear sensors?

Check your Bmw 750li Xdrive owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Bmw 750li Xdrive application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Bmw 750li Xdrive?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Bmw 750li Xdrive. If replacing 750li Xdrive pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Bmw 750li Xdrive.

Will the brake warning light turn off automatically after installing a new sensor on my Bmw 750li Xdrive?

On most Bmw 750li Xdrive vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Bmw 750li Xdrive European platforms, a diagnostic scan tool reset may be required. Check your 750li Xdrive service documentation if the light does not clear after installation.