Acura Zdx ABS Wheel Speed Sensor in US

Your Acura Zdx ABS wheel speed sensor is the component that makes anti-lock braking possible on your Zdx. It monitors the rotational speed of each wheel in real time and sends that data to the Acura Zdx ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Zdx, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Acura Zdx wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Acura Zdx

The ABS wheel speed sensor on the Acura Zdx is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Zdx. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Zdx ABS module interprets as wheel speed. On most modern Acura Zdx vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Zdx systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Acura Zdx

• ABS warning light on your Acura Zdx dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Zdx ABS light
• ABS activating on your Acura Zdx during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Zdx, wheels lock under hard braking on wet or icy roads
• Speedometer on your Acura Zdx reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Acura Zdx ABS control module

Passive vs. Active ABS Sensors for the Acura Zdx

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Acura Zdx. Passive sensors use an analog signal and are found on older Zdx vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Acura Zdx vehicles manufactured after the mid-2000s and are required for full compatibility with modern Zdx traction and stability control systems.

Why GeoBrakes for the Acura Zdx ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Acura Zdx wheel speed sensors. A sensor that generates the correct frequency for your Zdx ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Acura Zdx. Every sensor in the GeoBrakes catalogue is matched to the Acura Zdx through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Zdx.

Frequently Asked Questions - Acura Zdx ABS Wheel Speed Sensor

Can I drive my Acura Zdx with a faulty ABS wheel speed sensor?

You can drive the Acura Zdx with a failed ABS sensor, but the anti-lock braking system on your Zdx will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Acura Zdx. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Acura Zdx?

Use the GeoBrakes vehicle selector and enter the Acura Zdx year, make, and model. The system displays only the sensors confirmed to fit the Acura Zdx, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Zdx to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Acura Zdx at the same time?

No. ABS wheel speed sensors on the Acura Zdx are independent components and only the failed unit needs to be replaced. However, if your Zdx has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Acura Zdx sensors for corrosion while the wheel is removed.