Standard/OE$53.00
1 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks complete parking brake shoe kits confirmed to fit the Acura Rl drum-in-hat rear parking brake system, combining OEM-grade parking brake shoes matched to the Rl drum diameter with the return springs, shoe strut, adjusting screw assembly, and retaining clips needed for a correct, fully functional parking brake service on your Acura Rl. Replacing shoes without the hardware is the leading cause of parking brake failure after service on the Rl in American conditions.
Standard/OE$53.00
1 items in stock
Select your vehicle to see compatible products and accurate pricing
A parking brake shoe kit for the Acura Rl restores complete parking brake function, not just the friction lining. The most common reason a freshly serviced Rl parking brake fails to hold on a hill is not worn shoes: it is a seized adjuster that prevents the shoe-to-drum clearance from being correctly set after installation on your Acura Rl. In the enclosed drum-in-hat cavity of the Rl, road salt and meltwater concentrate corrosion on the adjuster threads, the return springs, and the strut. A kit that includes every hardware component alongside the shoes is the only way to guarantee the Acura Rl parking brake performs correctly after service.
The kit for your Acura Rl includes parking brake shoes with OEM-grade friction lining at the correct arc length and lining width for the Rl drum-in-hat diameter, return springs that retract both shoes cleanly after the Rl parking brake is released, hold-down hardware with springs and pins that locate the shoes while permitting actuation on your Acura Rl, the parking brake strut connecting both shoes through the Rl mechanism, the adjusting screw assembly setting correct shoe-to-drum clearance for reliable holding force on your Acura Rl, and retaining clips and washers securing the strut and adjuster in correct operating position on the Rl.
The parking brake shoe adjuster on the Acura Rl sets the gap between the shoes and the inner drum surface of the Rl rotor hat. In American winters, the drum-in-hat cavity of the Rl traps road salt and moisture. The adjuster threads on your Acura Rl corrode and seize, sometimes within a single winter season. A seized adjuster on the Rl produces a parking brake that either drags against the drum when released or fails to hold the Acura Rl on a slope when engaged.
Parking brake shoe kits for the Acura Rl are among the most vehicle-specific brake components in the catalogue. The shoe arc length, lining width, spring rates, strut length, and adjuster thread specification for the Rl are all determined by the specific drum-in-hat diameter of the Acura Rl rotor. Every kit in the GeoBrakes catalogue is assembled for the Acura Rl exact year and model, with zinc-plated or coated hardware components to resist the concentrated corrosion inside the Rl drum-in-hat cavity.
How do I know if my Acura Rl uses parking brake shoes?
Acura Rl vehicles with four-wheel disc brakes often use a drum-in-hat parking brake requiring separate shoes. Some Rl variants instead use a caliper-actuated parking brake. Use the GeoBrakes vehicle selector to confirm your Acura Rl parking brake type and find the correct kit.
My Acura Rl parking brake light stays on after I release it, do the shoes need replacing?
A warning light that stays on after full release on the Acura Rl can indicate worn shoes, a faulty sensor, low brake fluid, or a stretched cable on the Rl. If the Acura Rl fails to hold on a slope, a shoe kit replacement combined with cable and adjuster inspection is the recommended starting point for your Rl.
Can I adjust the parking brake on my Acura Rl after installing a shoe kit without replacing the cable?
Yes, if the Rl cable is in good condition and within its adjustment range. After correct shoe installation and adjuster setting on the Acura Rl, adjust the cable until the brake holds firmly within three to five clicks of Rl lever travel.